
No backyard retreat is more pleasurable than a hot tub. Integrating human wellness into outdoor leisure, in-ground hot tubs may be a time investment, but mastering the subtleties of measuring a hot tub for a cover can make the process a whole lot easier. In this guide, we’ll demystify the seemingly confusing task of finding the right cover to fit your hot tub. From tools to use to steps on how to get the right size cover, let’s explore how to measure a hot tub for a cover.
Measure Your Hot Tub for a Cover
It’s easy to get overwhelmed when you’re shopping for a new hot tub cover, not knowing where to begin with measuring it and making sure you get the right size that fits your hot tub perfectly. But with the right set of tools and some careful measurements, you can get the perfect cover that’s tailored just for you. In this section, we’ll walk you through the steps of measuring your hot tub for a cover and give you all the information you need to find the right fit.
How to Measure a Hot Tub for a Cover
Measuring for a hot tub cover for a perfect fit can seem daunting, but the right tools and a few simple steps make the process easy. To get the right size cover and ensure the best possible fit, it’s important to measure all sides of the hot tub including the corners.
Tools Needed to Measure a Hot Tub for a Cover
A few specific tools are necessary to measure a hot tub for a cover. Gather the following items before you begin:
- Measuring tape
- Pen and paper
- Paper ruler
- Scissors
Step-by-Step Guide to Measure for a Hot Tub Cover
- Measure the length and width of the spa at the widest points. Note: Measure in millimeters (mm).
- For round hot tubs, measure the radius of the hot tub. Note: Radius is the distance from the center of the curved area to the outside edge.
- Measure from the outside edge of the hot tub to the center of any jets. This will help you find the structural support measurements.
- Write down every measurement of the hot tub on paper.
- Measure the depths of the spa. Hot tubs come in different depths, so you must measure the depth at each corner and the center.
- Cut a piece of paper for each side and corner.Note: Make sure each piece of paper is big enough to fit on the hot tub.
- Lay the papers on the spa and mark the exact location of the jets and other features.
- Cut the papers to fit around the outside edge of the spa.
- Add an extra 1.5 inches to your measurements to account for shrinkage when the cover is wet.
How to Get the Right Size Hot Tub Cover
Once you have recorded all of your measurements, you are ready to purchase your hot tub cover. Many hot tub covers are custom made with your exact measurements, and some come in standard sizes. When ordering a custom hot tub cover, make sure to provide all of the measurements you took, including those for structural support, depth, and radius. If ordering from a standard size selection, make sure to measure your hot tub accurately and choose the closest size that meets your measurements.
Tools Needed to Measure a Hot Tub for a Cover
Tools Needed to Measure a Hot Tub for a Cover:
Before measuring, make sure to gather the right set of tools so that you can take accurate measurements.
You will need the following tools:
1. A tape measure – you will need to measure the length and width of the hot tub
2. A curved measuring tool – this is used to measure the radius of the hot tub corners and other curved parts of the tub
3. A yardstick or another straight measuring tool – this is used to measure the distance between the jets and other straight lines
4. A marker – you will need this to mark the position of the jets
5. Calculators – for measuring the depths and adding 1.5 inches to the measurements
It is also important to note that if you’re measuring a round hot tub, you will need to take additional measurements for the center and the circumference of the hot tub.
Taking accuracy and precision into consideration, having the right set of tools when you measure your hot tub for a cover is essential in getting the perfect fit. Make sure to have all the tools and materials mentioned above on hand before you begin the process.
Step-by-Step Guide to Measure for a Hot Tub Cover
- Measure the length and width of your hot tub from outside edge to outside edge using a tape measure.
- For a round hot tub, measure the radius (from the center of the hot tub to the outer edge) with a curved measuring tool.
- Determine the spacing distance between each jet, from center to center, with a yardstick.
- Measure the depths of the hot tub in different areas using a yardstick.
- Closely inspect the hot tub and identify any prominent protrusions. Mark the positions of any existing drains, jets, and handles with a marker.
- Add 1.5 inches to each of your measurements when ordering a cover to make sure it fits correctly.
- Compare your measurements to the hot tub cover sizes available online or at your local store. Choose the closest size to your measurements when ordering.
Accurately measuring a hot tub for a cover is an important step in making sure the cover fits perfectly. Following these steps and using the right tools will ensure the cover you purchase will protect your hot tub for years to come.
How to Get the Right Size Hot Tub Cover
The key to getting the right size hot tub cover is to measure your hot tub correctly and make sure to add 1.5 inches to all your measurements. Here is a step-by-step guide to getting the right fit:
- Measure the length/width of your hot tub using the tape measure. Make sure to apply the same 1.5 inches when measuring width.
- Measure the radius of the tub by using a curved measuring instrument (for round shaped tubs).
- Measure the distance of the jets from the front, back and corners of the tub for the best fit. Add 1.5 inches to the jet distances for a secure fit.
- Measure the depths of your hot tub for the best fit. Add 1.5 inches to the depth measurements.
- Mark the position of the jets on the tub to get the best fit.
- Compare your measurements to the sizes of the hot tub covers available online or in stores. Choose the closest size and add a few inches of extra material just in case.
Following these steps will ensure you get the perfect fit for your hot tub cover. Make sure your measurements are completely accurate and that you’ve added 1.5 inches to all dimensions before you order a cover. This will ensure you get the best temperature and energy efficiency out of your hot tub cover.
FAQ
Does a hot tub cover have to fit exactly?
No, a hot tub cover does not have to fit exactly to provide effective protection for your hot tub. A cover that is slightly larger than your hot tub can still protect it from dirt, debris, leaves, and insects. However, it is important to make sure the cover is not loose enough to be able to be blown off in the wind.
How much space do you need for a hot tub cover?
The amount of space needed for a hot tub cover will depend on the size of the tub. Generally, a hot tub cover lasts 10-15 years and will need to fit the tub perfectly to ensure maximum watertightness. Make sure to measure your hot tub before purchasing a cover to ensure that you get the right fit.
How do you measure a spa lid?
To measure a spa lid, you will need a tape measure or ruler. Begin by measuring the length and width of the deck area. This is the area where the spa sits on the ground. Measure from one end to the other and make a note of the measurement. The next step is to measure the height of the spa lid. Measure from the bottom of the lid to the top. Once you have these measurements, you can find the exact size of the lid.
How do you measure the corner of a hot tub cover?
To measure the corner of a hot tub cover, use a measuring tape or ruler to measure from the center of one edge to the center of the opposite edge. This measurement, referred to as the diagonal measurement, will give you the corner size of the hot tub cover.
Conclusion
In conclusion, measuring a hot tub for a cover is a simple task that requires only the right tools. Armed with a tape measure, curved measuring tool, yardstick, marker and calculator, you can accurately measure the length/width, radius, jet distance, depths, and center and circumference (if round hot tub) and add 1.5 inches for a perfect fit. By following the step-by-step guide for how to measure a hot tub for a cover, you can confidently order the right size cover for your hot tub.